Inorp

Aftermarket PDC installed on a Skoda Octavia 1.9 tdi 2009.Electrical wiring done through the spare wheel bucket up to the left and directly to the reverse light. + a breaker switch in case the kit starts to beep towing.

Seems to work great with an aftermarket towbar as well.

Some orientating pictures from a Kovil towbar installation procedure. Use on you own risk.

Electrical installation was done through the predrilled holes to the left and right of the towbar – into the spare wheel bucket. Then up to the left where all necessary cables for this relay-based electrical kit where.

Some illustrating pictures of what happens when the electrical box in Skoda Octavia Estate TDI 1z chassie 2009 gets water in it.

Symptom of this vehicle was a cooling fan starting as soon as the car was shut off – even in middle of the winther with a cold car. Also a complete christmas tree of error codes when checking the car with vcds.

On your own risk!

First – replace the stalk. WITH GROUND CABLE DISCONNECTED FROM BATTERY!

Second – Recode ECU. (VCDS used)

Also – in order to activate the cruise control on the 1z (and previous?).
– With VCDS, choose 01 – Engine
– Coding – 11
– Enter 11463 to activate cruise control